Chapter 2
16
RAYLASE SP-ICE 2
MN043 / v1.0.2
2.4.7
Interface for Slave Control
At this 26-pin D-SUB female connector, up to three RAYLASE SP-ICE2 slave boards can be
connected. This makes it possible to operate up to four laser beam scan units with one SP-ICE
2 control card in parallel. For further information please contact RAYLASE.
This option is reserved for future use.
2.4.8
USB H Interface
Via this connector an USB adapter can be connected. The adapter is fitted at a free slot
bracket at the rear panel of the PC.
Specifications
PIN Signal
PIN Signal
1
+ 5 V, 500mA Output (Host)
2
+5 V
3
D+ (Host)
4
D+ (Client)
5
D- (Host)
6
D- (Client)
7
GND
8
GND
Standard
USB 2.0 (12 Mbit/s)
ESD protection ± 10 kV
