User’s guide Ytterbium Pulsed Fiber Laser RFL-P200 Ver.: 1.0
3
Figure 1 shows safety labels and their locations. These include warning labels, apertures through
which laser radiation is emitted and labels of certification and identification, etc. Specifications
of these labels are as follows:
Table 1: Specifications of Safety Labels
1.Aperture Label
2.Class 4 Laser Product
3.Class 2M Laser Product
Label for Guide Laser
4. Identification Plate
5. Electrical Hazard
6.Laser Radiation Hazard
1.4
Optical Safety
Any dust on the end of the collimator assembly can burn the lens and damage the laser.
CAUTION:
If the output of the device is delivered through a lens with
an anti-reflection coating, make sure that the lens is of good quality and
clean.
CAUTION:
DO NOT emit when the protective cap is not removed, or
the laser will be damaged.
