User’s guide Ytterbium Pulsed Fiber Laser RFL-P200 Ver.: 1.0
17
4.2
Rear Panel
Figure 7 shows the rear panel.
Figure 7: Rear Panel View
1.
AC INPUT:
The socket for supply input that can be only mated with the plug on the power
cord we provided.
2.
POWER:
AC power switch, the main switch of the laser.
3.
CTRL-INTERFACE:
Control interface, this interface is a male DB25 connector and it’s
multi-functional.
4.
RS-232:
RS-232
serial port, this interface is a male DB9 connector.
5.
SERVICE
: This Service is a female DB9 connector, the definitions of the port is in section
4.4.1
.
6.
WATER:
Pipe connectors, the inlet and outlet for cooling water flow in and return, suitable
for 10 mm PU pipes.
