55M4300CCE00 Rev A
5
AUTOMATIC LOGS
“Fault log”
The fault log screen is a diagnostic tool used to record intermittent errors detected in
various parts of the system. The numbers on the right hand side of this screen
represent a count of the number of individual faults detected for each component and
can be useful in tracing system faults.
Navigate through the calibration menu using
“
”
or
“
”
to highlight “fault log” and
press
“
”
to enter.
Note the fault status, press
“
”
to return to the main calibration menu or press
“XX”
to
reset all the counters to zero.
“Event recorder”
The event recorder provides a summary of lifts performed in each 10% band of SWL, it
also provides a count of ATB and bypass activations.
Note:
the event recorder does not
replace the data logger feature as no date and times are recorded, the counters can be
reset at any time and event data is not downloadable for external analysis.
Navigate through the calibration menu using
“
”
or
“
”
to highlight “event recorder”
and press
“
”
to enter.
Summary of Contents for i4300
Page 2: ...55M4300CCE00 Rev A ...
