Description
The QuickNet-Check monitor is used to verify the continuity of the
QuickNet heating cable and the integrity of its outer jacket during the
installation process. The monitor connects to the cold leads of the cable
and, if the heating cable is damaged, the alarm on the monitor will
sound. The monitor can also be re-used for subsequent installations and
to help troubleshoot any problems that may arise.
Tools Required
• Phillips (No. 1) screwdriver
Other Materials Required
•
QuickNet System Installation Manual
(H57704)
•
QuickStat
®
Thermostat Installation and Operation Manual
(H57725)
• Two (2) AAA batteries
Kit Contents
Item Qty Description
A
1
QuickNet-Check monitor
•
Do not
power the QuickNet Floor Heating
System with the QuickNet-Check installed.
Doing so can damage the monitor and the
heating mat.
• Use of the QuickNet-Check monitor
does not
replace performing the three commissioning
tests as outlined in the
QuickNet System
Installation Manual
(H57704). The Insulation,
Heating Cable and Sensor Resistance
tests
must
be performed as stated in the
Installation Manual and the readings must be
recorded for the warranty to apply.
Power
Alarm
Power
Alarm
QuickNe
t
®
-Check
IMPORTANT:
Installation Instructions
QuickNet
®
-Check
QuickNet Heating Cable Continuity Monitor
A
Front
Back
Power
Alarm
Power
Alarm
QuickNe
t
®
-Check
