21
SEE FIG. 16
NOTE:
PLEASE REMOVE PLASTIC PROTECTION ON
DOOR LININGS.
1.
Open the burner access door. Remove door and put in
a safe place.
(Rayburn 680KCD C/F only).
2.
Remove 4 inner panel securing screws and remove
panel.
3.
Remove the 3 plinth securing screws and remove
plinth.
1.
Make electrical connections to terminal strip as wiring
diagram. (See Fig. 6).
1.
Before connecting the flexible oil pipe to the pump
inlet, open the stop valve slowly and run off some of
the oil into a receptacle to establish an air free and
clean supply to the pump. Make the connection onto
the oil pump tight and leave valve open.
Commissioning Instructions
Fig. 16 - Rayburn 680KCD C/F shown
DESN 516261
DESN 515623
Fig. 17
BURNER ACCESS
OIL PUMP
ELECTRICAL CONNECTION
TERMINAL STRIP
