Rayburn 600K, Servicing Instructions

Page: 14 / 32

SEE FIG. 16
Follow instructions in sections BURNER ACCESS, Steps
1 to 3 and BURNER REMOVAL.
1. Remove both HT leads from ignitor.
2. Remove mains plug from ignitor.
3. Remove earth screw.
4. Remove 2 ignitor securing screws.
5. Remove ignitor.
6. Fit new ignitor, re-assemble in reverse order.
SEE FIG. 17
Follow instructions in sections BURNER ACCESS, Steps
1 to 3 and BURNER REMOVAL.
1. Remove plug.
2. Remove solenoid securing nut and washer.
3. Remove solenoid coil.
4. Fit new solenoid coil, re-assemble in reverse order.
14
Replacement of parts (Burner)
Fig. 16 DESN 515770
Fig. 17 DESN 515771
SOLENOID COIL
IGNITOR
EARTH
SCREW