The Rayburn Cookmaster 200S is intended to supply
heating for cooking.The Rayburn Cookmaster Plus
212S is intended to supply heating for cooking and
domestic hot water.
The cooker fully meets the requirements of BS: 1252
and is fully approved by the HETAS Ltd Approval
Scheme.
Air for combustion within the firebox and the rate of
burning is determined by the manually operated
spinwheel control on the ashpit door and flue damper.
With normal usage in 24 hours continuous burning the
Rayburn Cookmaster Plus 212S has an approximate
output of 100 gallons of hot water. To provide 2 or 3 hot
baths at intervals and normal household requirements,
the following conditions must be fulfiled:-
REMEMBER, when replacing a part on this
appliance, use only spare parts that you can be
assured conform to the safety and performance
specification that we require. Do not use
reconditioned or copy parts that have not been
authorised by AGA.
Rayburn Cookmaster Plus 212S
- It is recommended
that a 140 litre (30 galls) indirect hot water storage
cylinder of the double feed type, (e.g. manufactured by
Albion Cylinders) complying with BS 1566 Part 1: DF
Type 8 should be lagged and fixed vertically as near as
possible to the cooker.
Installation Instructions for
Rayburn Cookmaster 200S
and Rayburn Cookmaster
Plus 212S Solid Fuel Cooker
PERFORMANCE
HOT WATER SYSTEM
1
09/05 EINS 511037
Consumer Protection
As responsible manufacturers we take care to make sure that our
products are designed and constructed to meet the required safety
standards when properly installed and used.
IMPORTANT NOTICE: PLEASE READ THE ACCOMPANYING
WARRANTY.
Any alteration that is not approved by Aga-Rayburn,
could invalidate the approval of the appliance, operation of the
warranty and could also affect your statutory rights.
Important
This appliance may contain some of the materials that are
indicated. It is the Users/Installers responsibility to ensure that the
necessary personal protective clothing is worn when handling,
where applicable, the pertinent parts that contain any of the listed
materials that could be interpreted as being injurious to health and
safety, see below for information.
Firebricks, Fuel beds, Artificial Fuels
- when handling use
disposable gloves.
Fire Cement
- when handling use disposable gloves.
Glues and Sealants
- exercise caution - if these are still in liquid
form use face mask and disposable gloves.
Glass Yarn, Mineral Wool, Insulation Pads, Ceramic Fibre,
Kerosene/Gas Oil
- may be harmful if inhaled, may be irritating to
skin, eyes, nose and throat. When handling avoid inhaling and
contact with skin or eyes. Use disposable gloves, face-masks and
eye protection. After handling wash hands and other exposed
parts. When disposing of the product, reduce dust with water
spray, ensure that parts are securely wrapped.
WARNING
THE ASHPIT DOOR AND FIREBOX DOORS MUST BE
LOCKED CLOSED AT ALL TIMES DURING NORMAL
USE, EXCEPT WHEN LIGHTING OR RE-FUELLING
DESN 510179 C
Better than you ever imagined
Summary of Contents for 200S
Page 16: ...7 ...