Fast and Furious Arcade
7 |
P a g e
Specifications
For reasons such as performance, this product’s specifications may change without notice. Federal patent,
copyright and other intellectual property laws protect the content, devices and design of the game and its
equipment.
CAUTION
•
This machine features moving parts and should only be serviced by a trained and experienced
technician.
•
Disconnect all power and air supply before servicing the machine.
•
Keep area around the machine clear and free of objects that present a trip hazard. Allow for
plenty of room for players to safely enter and exit the machine.
•
Observe ALL of the following guidelines to prevent injury, accident, or damage.
o
Maximum of one person on the machine at any time.
o
If a player fatigues or experiences motion sickness or is unable to continue the game for
any reason, stop the game motion immediately by pressing the MOTION STOP button.
Allow the person to rest and exit the game with assistance if needed.
o
Remain seated for the entire duration of the game. Do not stand or exit while the game is
moving. Press the MOTION STOP button before exiting the game.
o
Keep hands and legs inside the game at all times while in motion. Remain in the game
until game comes to a complete stop.
o
Do not attempt to reach for objects on the floor or near the game when it is moving. Stay
clear and stand at a safe distance while game is in motion.
o
Small children should always be accompanied by a parent or guardian.
•
The machine is equipped with safety features which the operator and the player need to be
familiar with:
o
MOTION STOP button is located on the left side of the seat pedestal, under the dash. This
button will stop the motion feature once pressed.
o
Bellows around the moving part of the machine prevent access between the base and the
moving part. Make sure that the bellows are not damaged or showing signs of excessive
wear that could lead to failure. Replace the bellows when this occurs. Use only
tamperproof screw fasteners as specified.
o
The machine is designed so that there is no unintended movement in the absence of a
logic signal as might be experienced during a power outage. Make sure that the machine
is safe to operate before turning power back ON.
•
Critical parts should be maintained and inspected regularly for safe operation. If those critical
parts are damaged, broken, or installed incorrectly, replace them, or install correctly. Use only
manufacturer’s specified parts for continued safety and reliability. C
ontact your distributor to
order replacement parts.
