Fast and Furious Arcade
18 |
P a g e
Check Electrical Settings
1.
Verify the voltage in the nearest AC outlet.
2.
Verify the AC outlet ground connection is present and working.
***Recommended: Game on dedicated breaker to prevent capacity overload (20A@120VAC,
10A@230VAC)***
***Recommended: UPS (Uninterruptible Power Supply)***
Startup Game
1.
Plug the two line cords into an AC outlet (
Recommended: plug the line cords into a dedicated
breaker to prevent capacity overload (20A@120VAC, 10A@230VAC))
.
2.
Turn the main cabinet power switches on (there are two switches, GAME and COMPRESSOR).
3.
Calibrate the steering (follow onscreen prompts).
4.
Calibrate the gas and brake pedals (follow onscreen prompts)
5.
Calibrate the motion platform (follow onscreen prompts)
6.
Calibrate the camera (follow onscreen prompts).
***MACHINE IS NOT OPERATIONAL WITHOUT FIRST CALIBRATING THE HARDWARE***
7.
Verify the game and all components are operating normally. See
Basic Functional Test on Initial
Power Up
in the
Diagnostics and Adjustments
section for the recommended procedure.
8.
Complete the monitor setup for both monitors (next page).
