20
Raveon Technologies Corp.
8. Debug Related Commands
Bench Testing
(Must be in command mode to test. Enter +++ at the keyboard to put unit into config/test mode.)
ATTD x
Various transmit test routines.
0 = Go back to normal mode. Stops the test.
1 = Random data transmit.
3 = Force PLL to fast lock mode
4 = Transmit all 0s
5 = Transmit all 1s
7 = Transmit CW on center of channel
8 = Transmit preamble (101010 pattern)
ML x
Debug Message Level. By default and at power on, this level is set to 0
(no debug messages).
0 = no debug or diagnostic messages
1
=DART, and data reception related message will come out serial port
2 = Verbose messages, Mostly used for factory and engineering purposes.
SHOW
Display an overview of the configuration.
STAT
Display statistics of how the modem is working.