Version C16. February 2013
Raveon Technologies Corporation
Company Confidential
15
(not ring
signal)
Note: RS-232 signals use positive and negative voltages to represent digital 1s and 0s. A positive voltage is a
0, and a negative voltage is a digital 1.
This pin-
out allows it to be directly plugged into a computer’s 9-pin serial port using
a conventional 9-pin RS-232 serial cable. To connect it to a modem, or peripheral
that has a serial port, you will need a “
null-modem
” cable. See Appendix A for
more information on wiring a null-modem cable.
4.4.
-WX weatherproof Version
The
–WX version of the product is functionally the same as the standard version,
but is IP65 rated for weather resistance. It has special water-resistant connectors,
and a sealed enclosure to keep moisture out of the unit.
The DC Input connector is a Bulgin PX0412/03P
The RS-232 I/O connector is a Hirose HR30-6R-6P(71)
The RF I/O connection is a TNC female.
Power Cord
The DC power cord uses a Bulgin connector, part number SA3349/1. Please note,
diagram 2 is only for use with WX-Z models.
