Slingshot Field Hub 2.0 I V1.0
Slingshot Field Hub 2.0-EN-V1.0 I Pag 11/16
After a connection has been established, press the button
with the ‘wrench’ on it to change the settings (Figure 19).
The possible settings are shown in Figure 20. Select the
country and the network provider from the internet signal.
If the used provider is not in the list, please only fill in the
APN (always needed), Username (if needed) and Password
(if needed, varies per provider).
Mode, Band and Roam can be set on 0 but it depends on
preferences. SBG systems always use Baudrate 19200.
The Username and Password in the Slingshot
Manager belongs to the network provider and
NOT to the correction signal account from the
customer!
When all the settings are set they can be stored and
verified by pressing the Save Button (Figure 20). The wizard
as in Figure 21 appears. It can take up to 4 minutes before
the Field Hub has been set with the given settings and has
done the reboot.
When all checkmarks on the list are green, press the green
checkmark on the bottom to close the setup wizard.
Figure 21 Setup modem
Figure 20 Settings Slingshot Manager