Raven Slingshot Field Hub 2.0 Installation Manual Download Page 3

1

Table of Contents

Table of Contents  ................ 1

Field Hub 2.0 Kit Contents:   

... 1

Recommended: 

...................... 1

Overview ............................... 2

Updates 

.................................. 2

Installation ............................ 2

Best Installation Practices 

....... 2

Installation Checklist 

............... 4

Operation .............................. 5

LED Status Indicators 

............. 5

Slingshot RTK 

......................... 6

Wi-Fi Field Hub Models 

.......... 6

Operating Conditions 

.............. 6

Installing the SIM Card 

........... 7

Troubleshooting .................. 8
System Diagrams  .............. 10

Field Hub 2.0 Kit Contents:

    

* Part numbers based on region, wireless service provider, or Wi-Fi version. 

Contact a local Slingshot dealer for availability and subscription information.

FCC Statement:

This device complies with Part 15 of FCC rules. 

Operation of this device is subject to the following 

two conditions:
1. This device may not cause harmful 

interference.

2. This device must accept any interference 

received, including interference that may 

cause undesired operation.

This equipment generates, uses and may radiate 

radio frequency energy and, if not installed and 

used in accordance with the instructions, may 

cause harmful interference to radio 

communications. However, there is no guarantee 

that interference will not occur in a particular 

installation. If this equipment does cause harmful 

interference to radio or television reception, which 

can be determined by turning the equipment off 

and on, the user is encouraged to try to correct 

the interference by one or more of the following 

measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the 

equipment and receiver

• Connect the equipment into an outlet on a 

circuit different from that to which the receiver 

is connected

• Consult the dealer or an experienced radio or 

television technician for help

Magnetic Antenna 

Base (x2)

 (P/N 063-0173-172)

Ethernet Cable

 (P/N 420-2002-038)

Aerial Antenna 

Mounting Plate (x3)

 (P/N 063-0172-971)

 

GPS Patch Antenna

 (P/N 063-0173-179)

Field Hub (P/N 063-0173-xxx)*

Wi-Fi Field Hub Antenna 

(P/N 121-0000-037)

Cellular Antenna (x2)

 (P/N 121-0000-036)

Standard Model

Wi-Fi Model

Viper 4 Ethernet Cable

Recommended:

2 meter - P/N 115-0172-090

4 meter - P/N 115-0172-210

Power Cable

 (P/N 420-2002-059)

Summary of Contents for Slingshot Field Hub 2.0















Reviews: