Raven Sidekick Pro ISO, Installation & Operation Manual

Page: 72 / 82

C
HAPTER
8
68 Sidekick Pro™ ISO Installation & Operation Manual
SIDEKICK PRO™ ISO PUMP REPLACEMENT PARTS
FIGURE 2. Injection Pump Components
INJECTION PUMP PRESSURE TRANSDUCER
To replace the pressure transducer (P/N 422-0000-090):
WARNING
Always use caution when performing
maintenance or servicing an injection pump or
system which has been previously pressurized.
Wear appropriate protective equipment to
prevent contact with hazardous chemicals and
rinse the chemical system as instructed by the
chemical manufacturer prior to performing
maintenance.
Plumb to point of
injection check
valve
Pump Flow Monitor Switch
(P/N 063-0173-492)
*Requires adapter cable
(P/N 115-0172-110) to mate
with weather pack connector
Plumb to Chemical
Tank
Recirculation Check Valve
(P/N 333-0011-100)
Pump Pressure Transducer
(P/N 422-0000-090)
*Not included with
Replacement Pump
Assembly
Pump Vacuum Switch
(P/N 063-0171-035)
Pump Calibrator (Only)
(P/N 063-0172-822)
Complete Assembly with 3-
Way Valve
(P/N 063-0173-260)
Replacement Pump
Assembly
(P/N 063-0172-924)