Raven Sidekick Pro ISO, Installation & Operation Manual

Page: 67 / 82

P/N 016-0171-509 Rev. E 63
SYSTEM MAINTENANCE
7
FIGURE 3. Bearing Assembly to Motor Spacing (D/N 016-0171-134)
FIGURE 4. Pump Head Parts and Seal Installation
1. Empty product from the chemical supply tank and flush the injection pump with water.
2. Disconnect the injection pump plumbing and cabling. Remove the injection pump from the implement and
take to a suitable work area to perform maintenance.
3. Separate the pump from the motor by removing the four socket head screws.
4. Loosen the four socket head screws securing each pump head to the crank case.
5. Carefully remove the pump heads. While removing the pump heads, take care not to damage the exposed
finish on the piston during disassembly.
Item Description Raven P/N Qt.
1 O-Ring, Viton 219-0002-015 4
2
O-Ring, Compound 117965-
80
219-0007-117 2
3 Seal, 3/4” Slipper 219-0000-125 2
Piston
Bearing
(2 Places)
1
(4 Places)
Torque to 41 in/lbs.
(17 places)
Piston
2
(2 Places)
3
(2 Places)
Discharge Valve Assembly
(P/N 063-0172-504)
See Figure 1 on page 61
Discharge valve/Transducer Plug
Assembly
(P/N 063-0173-310)
Intake Valve Assembly
(P/N 063-0173-677)
See Figure 1 on page 61