Chapter 11
72
SCS 4000/5000 Series™ Installation & Operation Manual
Field Computer Set Up
Viper Pro
To set up the Viper Pro console for CAN product control:
1.
Touch the
Menu
button in the lower, right corner of the Viper Pro display.
2.
Select
Setup
and then
Prod Control
within the menu.
3.
On the Select Controller screen, select the CAN option from the list and touch the
OK
button to accept the
selection and return to the main screen.
Envizio Pro or Envizio Pro II
To set up the Envizio Pro console for CAN product control:
1.
Touch the
Tools Menu
icon on the Home screen.
2.
Select the
Control Interface
icon within the System submenu.
3.
Select the CAN Sprayer-Spreader Control from the list of product control options and touch the green check
mark to accept the selection and return to the main Tools Menu screen.
