APPENDIX
9
:
73
APPENDIX 9
TRIMBLE 372 CONFIGURATION
USING AGREMOTE
FIGURE 1. AgRemote Interface
Connect the 372 to the AgRemote via Port B.
GPS CONFIGURATION
1. Press the Right button until “Configuration” displays on the screen.
2. Press the Down button to select “Configuration”.
3. Press the Right button until “GPS Config” displays.
4. Press the Down button until “Position Rate” displays.
5. Press Right to set the “Position Rate” to 10Hz.
FIGURE 2. Position Rate Setting
6. Press Enter to save the settings.
Escape
Enter
Up
Down
Right
Left
