SBGuidance Auto I Rev. A I CAN
SBG-Auto CAN-EN-Rev. A I Page 39/52
6.2
Mounting of brand-dependent GPS antenna
bracket
If appropriate and available (check availability at SBG!)
a specific brand of GPS antenna bracket can be used.
The same guidelines as described in section 6.1 apply
to the installation.
6.3
Mounting one’s own design of GPS antenna
bracket
When there is no brand-specific GPS antenna bracket
available, and the mounting bracket of a standard GPS
antenna bracket is not possible, you can design your
own. For your own design, apply broadly the same
guidelines as for a standard GPS antenna bracket
(Section 6.1), with a number of additions:
Always mount the GPS antenna on the UNC
bolt (hole: Ø 16 mm) included.
Mount the TNC dummy at all times (hole: Ø 9
mm).
Optionally support the GPS antenna bracket
with the aid of a vibration damper.
Summary of Contents for SBGuidance Auto
