Raven RS1, Calibration And Operation Manual, Page: 39 / 108

016-4010-001 Rev. F 33
STEERING SETUP
FIGURE 8. Calibration in Process Screens
4. Press Accept to complete the calibration.
GUIDANCE SETUP SETTINGS
FIGURE 9. Guidance Setup Screen
• Guidance Mode - Displays the guidance modes:
◦
Raven Field Computer - Guidance is performed via GPS guidance points only.
◦
Vision - Guidance is performed via the VSN camera only. GPS corrections are neither utilized for guidance
nor available as a fall-back solution. Line acquire must be performed manually. When the solution quality
falls below the minimum threshold the steering system will disengage.
◦
- Guidance is performed via a combination of GPS and the VSN camera. This mode can be
utilized for line acquire via GPS with the system switching to the VSN camera when the machine is aligned
and near the guidance line.This mode will also fall back to GPS guidance if the solution quality falls below
the minimum threshold. The system will then return to VSN guidance automatically when the solution
quality is above the minimum threshold.
• Skip LA When Row Guidance Quality High - When enabled, the system will not attempt to line-acquire when
the quality from VSN is above the threshold set on VSN.