Installation: Install the RCM
11
INSTALLATION
INSTALL THE RCM
BEST MOUNTING PRACTICES
Ensure the installer follows all of the following guidelines for best mounting practices:
•
Use the standard RCM mounting bracket (P/N 107-0172-484).
•
By default, the orientation of the RCM is set to horizontal position with connectors pointing
downwards, ensuring that water or moisture will not enter the connectors.
FIGURE 3. Mounted RCM Node
ROUTE AND CONNECT THE CABLES
1. Connect the 12-pin Deutsch connector of the power cable to the in-cab harness.
2. Rotate and connect the RCM power cable (P/N 115-0172-616) to the gray male connector on the RCM.
FIGURE 4. RCM Power Cable Connected
Summary of Contents for RCM ARAG
