manualshive.com logo in svg

Raven Phoenix 300, Installation And Operation Manual, Page: 35 / 64

Share
Download
Raven Phoenix 300 Installation And Operation Manual Download Page 35

4

Manual No. 016-0171-548 Rev. C

29

Configuration Menus

SBAS Configuration Menu

Access the SBAS Configuration menu to manually select the differential satellite PRN (pseudo-random noise) 
value or allow the receiver to automatically select the differential satellite signal for corrections when using a 
satellite based augmentation system (SBAS) correction source.

Press the 

 key until the SBAS Configuration screen is displayed.

Current SBAS Configuration

Press the 

 key and the current configuration is displayed.

Press the 

 key and use the 

 or 

 arrow keys to manually select the PRN of the desired differential 

satellite. Select a value between 120 and 138.

Press the 

 key to select the displayed PRN number.

Note:

The SBAS number is the satellite PRN currently used for differential corrections. If this screen 
displays “SBAS AUTO” the Phoenix 300 will automatically select the satellite with the best signal 
to noise ratio for differential corrections.

Setting the Phoenix 300 to Auto may cause the receiver to switch differential satellites during 
operations.

Summary of Contents for Phoenix 300

































































Reviews:

No comments