Raven Phoenix 300 Installation And Operation Manual Download Page 28 | Manualshive

Page: 28 / 64

Raven Phoenix 300 Installation And Operation Manual Download Page 28

Chapter 3

22

Phoenix 300 Installation & Operation Manual

RTK Display Menu

Note:

The RTK display menu may only be available if “RTK” is selected on the Correction Mode screen.
Refer to the Correction Configuration Menu section on page 27 for more information on selecting
the correction source.

Access the RTK display menu to view reference or base station information. For RTK configuration options and
features, refer to the

RTK Configuration Menu

section on page 39.

Press the

key until the RTK Reference ID screen is displayed.

The reference ID displayed is the identification number assigned to the base station which the Phoenix 300
receiver is currently using for RTK corrections.

Baseline Information

Press the

key to display the RTK baseline, or distance from the base station location.

Use this screen to help determine whether or not the vehicle is within range of RTK level corrections from the
base station.

«
...
26
27
28
29
30
...
»

Summary of Contents for Phoenix 300

































































Reviews:

No comments