manualshive.com logo in svg

Raven Phoenix 300, Installation And Operation Manual, Page: 24 / 64

Share
Download
Raven Phoenix 300 Installation And Operation Manual Download Page 24

Chapter 3

18

Phoenix 300 Installation & Operation Manual

OmniSTAR

® 

Display Menu

Note:

The OmniSTAR display menu may only be available if “OmniSTAR HP/XP” is selected on the 
Correction Mode screen. Refer to the Correction Configuration Menu section on page 27 for more 
information on selecting the correction source.

Phoenix 300 with USB receivers with the following part numbers are compatible with the 
OmniSTAR correction service using GPS engine firmware version 6.40 or lower:

•

063-0173-502,

•

063-0173-559, and

•

063-0173-560.

See the Receiver Display Menu section on page 13 section for assistance with verifying the 
firmware version installed on the receiver. Contact a local Raven dealer for information on 
correction services available for Phoenix 300 receivers with newer firmware versions or additional 
assistance.

Access the OmniSTAR display menu to view subscription status and expiration information or service 
communication information right on the Phoenix 300 display. For OmniSTAR configuration options and 
features, refer to the 

OmniSTAR® Configuration Menu

 section on page 35.

Note:

Press the 

 

key until the OmniSTAR screen is displayed.

This screen displays the region for currently selected on the receiver. To provide the best possible correction 
signal to the receiver, make sure that this setting is properly configured via the 

OmniSTAR® Configuration 

Menu

 section on page 35.

Summary of Contents for Phoenix 300

































































Reviews:

No comments