Raven OmniSeed Viper Pro, Calibration & Operation Manual

Page: 156 / 308

Chapter 7
144 OmniSeed™ Viper Pro™ Installation & Operation Manual
Feature Settings Area for Granular Products
The information displayed in the Feature Settings area is an overview of the alarm and feature settings for the
selected product control node.
For granular product nodes or control channels, the following settings will be displayed in the Feature Settings
area:
Note:
The following sections offer descriptions of the various options and settings used with granular
products. For descriptions of the settings used with liquid products, see the Feature Settings Area
for Liquid Products section on page 147.
To modify the feature or alarm settings for the above features, touch within the feature settings area on the
CAN Controller Status screen.
Note:
Before changing any of the feature or alarm settings, be sure to select the correct product node or
control channel by touching the corresponding radio button displayed at the top of the feature
settings area.
•
Off Rate %
•
Bin Level Alarm
•
Zero Speed Shutoff
•
Low Tank
•
Bin Pressure Alarm
•
Low Limit
•
Decimal Shift
•
Display Smoothing
Status Screen Example
(Granular)