manualshive.com logo in svg

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Share
Download
Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 146

Chapter 6

134

OmniSeed™ Viper Pro™ Installation & Operation Manual

Saving an A-B Line

During the job setup, select Straight A-B or Fixed Contour as the swath pattern.

Once the job is started:

1.

Touch 

Set A

 to start the first swath path.

2.

Drive to the end of the first swath.

3.

Touch 

Set B

. The first swath path is now set.

4.

Touch the Guide Menu icon in the guidance screen. The A-B feature buttons will display.

5.

Touch the 

Save A-B

 button. The Save A-B Line screen will display.

6.

Using the on-screen keyboard, enter a name for the A-B line in the box. If no name is entered, the date and 
time are used for the A-B line.

7.

Touch 

OK

. The A-B line will be saved and Viper will display the guidance screen.

Note:

When saving lines, use unique names to help distinguish each line from other saved A-B lines. 
Avoid using dates and times as this will make selecting a previously stored A-B line more difficult.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands