C
HAPTER
3
16
ISO AutoBoom® Installation Manual for Case IH 3230, 3240, 3320, 3330, 3340, 4420, 4430, & 4440 (MY2010 & Newer)
Refer to the following table to install the fittings in the appropriate ports of the AutoBoom valve.
MOUNT THE AUTOBOOM VALVE
FIGURE 1. AutoBoom Valve Mounted on the Valve Mounting Bracket
1. Secure the UltraGlide AutoBoom valve (P/N 063-0131-124) to the mounting bracket (P/N 107-0171-802) using
four 5/16” hex bolts (P/N 311-0052-104) and four 5/16” lock washers (P/N 313-1000-019).
Fitting
Part Number
Port
Fitting - -6 ORFS (M) to -8 SAE O-Ring (M) 90° Elbow
333-0012-165
LF CYL RTN,
RT CYL RTN
Fitting - -6 ORFS (M) to -6 SAE O-Ring (M) Straight Adapter
333-0012-084
LC, RC
Fitting - -8 ORFS (M) to -8 SAE O-Ring (M) Straight Adapter
333-0012-168
P, T
Fitting - -6 Hex 9/16” O-Ring Plug
333-0012-194
LV, RV
