FLOWMAX 220 QUICK START GUIDE
OPERATION
Turn on FLOWMAX 220 by pressing
key.
NOTE:
Without activity, FLOWMAX 220 will shut off automatically after 90 seconds. After power down,
depress key to re-start FLOWMAX 220. (Flow pulse will not re-start the display).
METER CAL has been entered at the factory. Changing of the CAL number is required only after field replacement of
display assembly and/or flowmeter.
DISPLAY TITLES
Flow -- Flow Rate will flash (vol/min)
CLR V1 -- Clear Volume 1
2
e
m
u
l
o
V
r
a
e
l
C
-
-
2
V
R
L
C
s
n
o
ll
a
g
n
i
e
m
u
l
o
V
-
-
S
U
3
e
m
u
l
o
V
r
a
e
l
C
-
-
3
V
R
L
C
s
r
e
ti
l
n
i
e
m
u
l
o
V
-
-
I
S
"690" -- Adjustable Meter Calibration #
Lo BAT -- Limited battery life remaining
(preset at factory)
VOL 1 -- Total Volume #1 gallons [liters]
VOL 2 -- Total Volume #2 gallons [liters]
VOL 3 -- Total Volume #3 gallons [liters]
Depress key to initiate the display. Depress the key to toggle through VOL1, VOL2, & VOL3.
Depress key to display Flow Rate in gallons/min [liters/min].
ENTERING DATA
To Clear Volume Totals:
1.
Depress key until "VOL1" is displayed.
2.
Depress key.
3.
Display will flash "CLR V1" (depress
key to toggle between CLR V1, CLR V2, or CLR V3).
4.
Depress key (VOL1 will re-set to zero).
To Enter Meter Cal:
1.
Depress key.
2.
Depress key.
3.
Depress key until the METER CAL # is displayed.
4.
Depress key ("C" will appear on the right side of the display).
5.
Depress key to decrease Meter Cal # or depress key to increase Meter Cal #.
6.
Depress key to program adjusted Meter Cal #.
016-0159-873
SHEET 1 of 2
01/08 REV C