Raven Envizio Pro, Installation And Operation Manual

Page: 228 / 287

P/N 016-0171-493 Rev. I 213
5.
Select the communication port to which the weather station is connected. Select the:
•
COM2 option if the weather station is connected to the COM2 or Console port on the main
interface or chassis cables.
•
COM3 option if the weather station is connected to the COM3 or Auxiliary port on the auxiliary
interface or chassis cables.
6.
Touch the Reinitialize Port to restart the weather station comm port if necessary. This feature may be used
if the weather information does not display current conditions as anticipated.
Using the Weather Station
If weather station logging is enabled during an active job, the Envizio Pro will periodically record current
weather conditions for the application report.
To view current conditions or other weather station
information during an active job:
1.
Touch the Menu icon in the lower, right corner to
access the in-job menu.
2.
Select the Weather Station icon to display the
Weather Station screen.
3.
Touch the snapshot button to manually record the
current conditions to an active job for the application
report.
Note:
The snapshot button will only display during
an active job.
4.
Touch the Reinitialize Port to restart the weather
station comm port if the current conditions reported by
the station do not reflect conditions as expected.