Raven Envizio Pro, Installation & Operation Manual

Page: 92 / 232

Chapter 6
82 Envizio Pro and Envizio Pro II Installation and Operation Manual
Field Boundary Tools
The following Menu tools and features are available while creating a field boundary.
Note:
Spray/no-spray zones and maps are only available if the Raven AccuBoom, automatic boom
section control, system is enabled. Refer to Chapter 9, Using AccuBoom™, for more information
using the AccuBoom feature or contact a local Raven dealer for more information about the Raven
AccuBoom system.
Loading a Field Boundary
A previously recorded boundary can be loaded into the current job file by selecting the Load Field
Boundary icon in the Menu. A list of job files stored on the field computer is displayed. Select the
job name to load the boundary recorded during that job into the current job.
Recording a New Field Boundary
Touch the Record Field Boundary icon to begin recording a new field boundary. While a field
boundary is being recorded, the Pause and End Field Boundary icons (see the following icon
descriptions) are displayed on the Guidance screen.
Recorded
Boundary Path
Pause/End
Boundary