CHAPTER
4
Setup and Operation: Setup
51
CHAPTER 4
SETUP AND OPERATION
SETUP
ENABLE MAIN PRODUCT RECIRCULATION
To turn on main product recirculation:
1. Open the UT Menu and select the RCM-Sprayer Menu button.
2. Select the Tools Menu softkey along the right side of the display.
3. Select the Rates Setup tab along the top of the display.
4. Select the User Settings tab and select the Next button in the lower, right corner twice to display the Boom
Recirculation check box option.
5. Enable the Boom Recirculation feature.
NOTE:
The system will display a prompt for the operator to confirm that the plumbing of the system will
support boom recirculation features. Once confirmed, the Boom Recirculation softkey will be
displayed on the Home page.
6. Enable the Auto Recirculate feature to allow the system to automatically initiate the recirculation system any
time the system is not spraying.
NOTE:
Recirculation will always stop automatically when normal spraying is initiated, when tank fill
operations are started, when the main product is turned off, or when a direct injection product is
turned on.
The operator may also manually stop recirculation by selecting the Recirculation softkey on the Home
page. Pressing this button disables the Auto Recirculation feature and returns the system to Manual
Recirculation Mode.
7. The Boom Recirculation softkey will be displayed on the Home page.
UT Menu
RCM-Sprayer
Menu
Tools Menu
User Settings
Confirm
Rates
Setup
Off
On
Summary of Contents for Case IH 50 Series
Page 60: ......