Chapter 4
44
John Deere 4700 (1998 and Older) AutoBoom Installation Manual
Connect the Harness
FIGURE 16.
Machine’s Boom Function Coils
1.
On the harness cable (P/N 115-0230-045), locate the LEFT SOLENOID connector, then connect it to Port
‘4A’ on the AutoBoom Valve.
2.
Connect the connector labeled RIGHT SOLENOID to Port ‘4B’.
3.
Locate the machine boom function coils near the machine’s boom valve stack.
4.
Disconnect the connector from the machine’s “Left Up” coil. Install a tee adaptor cable (P/N 115-01717-632)
between the coil and to the machine’s coil connector.
5.
One at a time, connect tee adaptor cables to the “Left Down,” “Right Up,” and “Right Down” coils and to the
coil connectors.
6.
On the harness cable, locate the LEFT SOLENOID SENSE connectors. Isolate the connector labeled UP
and connect it to the “Left Up” coil via the installed tee adaptor cable.
7.
Connect the other (down) LEFT SOLENOID SENSE connector to the “Left Down” coil via the installed tee
adaptor cable.
8.
Connect the RIGHT SOLENOID SENSE connectors to the machine’s “Right Up” and “Right Down” coils via
the installed tee adaptor cables.
To Connect the Harness Cable
1.
Route the harness cable (P/N 115-0230-045) toward the machine’s cab.
2.
Connect the harness cable to the controller cable (P/N 115-0230-007). Tighten the connector screw cap to
secure.
Note:
Be sure the allow enough slack in the harness cable to allow for boom racking.
Summary of Contents for AutoBoom John Deere 4700
