Raven AutoBoom 9600, Installation Manual, Page: 19 / 79

3
Manual No. 016-0230-096 13
POWERGLIDE
FIGURE 1. Converted Hydraulic Valve - Closed Center to Open Center
INSTALL FITTINGS ON THE AUTOBOOM VALVE
Before mounting the AutoBoom valve on the machine, install the proper fittings on the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure. Refer to the following table
to install the fittings in the appropriate ports of the AutoBoom valve.
FIGURE 2. Fittings Installed on the AutoBoom Valve
Fitting Part Number Port
Fitting - 9/16” JIC (M) to 9/16” SAE O-Ring (M) Straight Adapter 333-0012-045 LC, RC
Fitting - 3/4” JIC (M) to 3/4” SAE O-Ring (M) Straight Adapter 333-0012-093 Left T, P, EF
Fitting - 3/4” JIC M/F 45° Swivel Elbow 333-0012-040 P
Fitting - 9/16” SAE O-Ring Internal Hex Plug 333-0012-104 LV, RV