Raven 053-0159-015, Installation Manual, Page: 21 / 48

3
016-5035-038 Rev. A 17
HYDRAULIC SYSTEM INSTALLATION
FIGURE 5. Remove Shield
4. Mount the valve bracket (P/N 116-0159-844) using 2 included M8x16mm bolts in the threaded holes from the
shield removed in step 3.
FIGURE 6. Steering Valve Bracket Mounted
5. Partially thread the four 5/16"x0.75” bolts and four 5/16" washers into the steering valve (P/N 334-0003-090).
6. Align the bolts with the notches, lower the valve to align the bolts in the bottom notches, and tighten the bolts
to secure the steering valve to the valve bracket.
NOTE: Make sure the washers are between the bolt head and bracket, not between the bracket and valve.
Remove
Shield