Raven 053-0159-015, Installation Manual, Page: 18 / 48

C
HAPTER
3
14 TC1/HDU Installation Manual for Kubota M5 Series (Non-Steer Ready)
INSTALL FITTINGS IN THE HYDRAULIC STEERING VALVE
Before mounting the hydraulic steering valve (P/N 334-0003-090) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
Refer to the following table to install the fittings in the appropriate ports of the hydraulic steering valve.
FIGURE 1. Fittings Installed in Hydraulic Steering Valve
TABLE 1. Steering Valve Fitting Installation
NOTICE
The appearance of the TC1 hydraulic valve may
vary slightly from the images contained in this
manual. However, the fittings, hose connections,
and cable connections remain the same.
Fitting Part Number Port
Fitting - -10 SAE O-Ring (M) to -6 ORFS (M) 333-0012-233 A, B
Fitting - -10 SAE O-Ring (M) to -8 ORFS (M) 333-0012-304 P, T
Fitting - -10 SAE O-Ring (M) to -10 JIC (M) 333-0012-246 EF
Port “B” Port “A”