17.1 Replacing the Filter Dryer and Mechanical Filter
The filter dryer must be replaced
when prompted to do so by the equipment
.
At the same time the mechanical filter must also be replaced.
A)
Mechanical filter
B)
Dryer filter
Given the position of the filters, proceed in the following order:
1.
Remove the old filter dryer.
2.
Remove the old mechanical filter.
3.
Install the new mechanical filter.
4.
Install the new filter dryer.
The procedure is detailed as follows.
There could be accidental refrigerant leaks while replacing
the filters.
Carefully follow the instructions provided below in order to
avoid the refrigerant from getting into the atmosphere.
Wear appropriate protective glasses and gloves when
replacing the filters.
You must carefully read and understand this Operating Manual in order to
perform the provided instructions correctly.
en | 39 | YUCON |
Ravaglioli
| 2024-03-01