13 COMMUNICATION
The charging station's controller integrates the following:
•
Wi-Fi module
•
Bluetooth module
The charging stations also have a USB connector.
13.1 Wi-Fi
The Wi-Fi module built into the controller allows you to connect the charging station to the
workshop's Wi-Fi network.
The Wi-Fi connection to the workshop's network allows the following:
•
connection to the printers in the network, to print reports in A4 format;
•
download of updates;
•
remote assistance;
•
connection with the smartphone on which the app is installed.
The connection to the Wi-Fi network must be configured through the software functions.
Proceed as follows:
1.
Turn on the charging station.
2.
Access the communication configuration functions.
3.
Start the configuration of the Wi-Fi communication.
4.
Follow the on-screen instructions.
In order to print in A4 format, the charging station and the printer
must be connected to the same Wi-Fi network.
To download updates and use the remote assistance functions,
the Wi-Fi network must have an Internet connection.
For further information see the software's Operating Manual.
| YUCON | 32 | en
| 2024-03-01
Ravaglioli