12.3 How to Load the Paper into the Printer
The printer is an accessory that can be purchased separately
and installed also on the other charging station models.
The buttons on the printer have the following functions:
Button Name
Function
PAPER FEED It allows the paper to come out.
ON/OFF
It allows setting the printer on on-line/off-line mode.
The printer is equipped with a green LED that indicates its status:
•
Solid on: printer on-line
•
Flashing: the printer is off-line or there is no paper
•
Off: printer off-line
The printer is automatically on-line when the equipment is switched on.
Press
if the status LED indicates that the printer is off-line.
Using the printer, it is possible to print a report containing the following information:
•
company data
•
vehicle data
•
customer data
•
operations carried out
For further information see the software's Operating Manual.
You must fill the printer with paper before use.
Proceed as follows:
1.Lift the paper compartment opening lever lightly until the corresponding cover locks.
2.Place the paper roll into the specific compartment.
3. Close the compartment by pressing lightly on the cover and leaving a slip of paper sticking
out.
4. Press
to make sure the paper has been inserted correctly.
5. Repeat the operations indicated above if the paper does not come out.
12.4 Initial Configuration
The first time the equipment is turned on, it requires you to select the software's display
language.
Once selected, the configuration wizard is started.
| YUCON | 30 | en
| 2024-03-01
Ravaglioli