4 SAFETY RULES
The technology used for the design and production control of the
YUCON
charging stations
make them simple, reliable and safe to use.
The personnel in charge of using the charging stations is required to follow the general safety
rules, use the charging stations for their intended use only and keep them properly, as
described in this manual.
All the safety requirements issued by the following must be assessed and applied:
•
Labour inspectorate.
•
Trade associations.
•
Vehicle manufacturers.
•
Anti-pollution regulations.
in force in the country where the product is used.
4.1 Intended Use
Product Intended Use
YUCON
Charging and servicing A/C and climate control systems on:
•
vehicles
•
truck
•
agricultural vehicles
The vehicle's A/C and climate control system must use one of the following
refrigerants:
•
R1234yf
•
R134a
•
R456a
•
R444a
4.2 Glossary
•
Equipment: any YUCON charging station.
•
Operator:qualified individual, in charge of servicing A/C systems using the equipment.
•
Internal cylinder: refrigerant storage cylinder.
•
A/C system: A/C or climate control system.
•
Refrigerant: a liquid capable of vaporising.
•
External cylinder: new refrigerant cylinder used to fill the internal cylinder.
•
Cycle: the carrying out of single phases.
•
Operating phase: the carrying out of a single operation by the equipment (i.e.
recycling).
•
Non-condensable gases: air accumulated during the vapour phase in the refrigerant,
extracted from the A/C system or from the cylinders.
•
UV tracer injection: introduction of UV tracer into an A/C system in order to check for
leaks.
•
Oil injection: introduction of oil into an A/C system in order to restore the correct quantity
recommended by the manufacturer.
en | 9 | YUCON |
Ravaglioli
| 2024-03-01