Instructions for Use RAUMEDIC
MPR2 logO
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
Page 9 of 99
2.3 Contraindications
The MPR2 is contra-indicated for use in MRT or MRI and must not be operated in a corresponding
environment.
Devices that meet the requirements of IEC 60601-1-2:2007 (for differentiation, see Section
10 Electromagnetic compatibility) are contraindicated for simultaneous use with electrosurgical devices.
The unit is not intended for use outside of the hospitals, such as in helicopters or in ambulances. The MPR2
is not intended for use in domestic settings.
2.4 Main operating functions
The main operating functions of the MPR2 are:
•
the installation of the unit, connect system components
•
the installation of the device, connect system components;
•
switch on the device;
•
connect the catheter;
•
selecting the recording mode;
•
connecting to a third-party system;
•
selecting the catheter zeroing;
•
determining the measurement location;
•
erasing the memory;
•
create patient file;
•
performing a simple functional pre-test of the alarm signals;
•
configure alarms;
•
deactivating the alarms;
•
measure;
•
display trend;
•
set storage mode;
•
monitor the temperature output value;
•
perform a simple functional pre-test of the medical thermometer;
•
switch off the device;
•
cleaning and disinfecting
The configuration of the unit is no main operating function.
2.5 Operating elements, connections, displays
The following two pages will render an overview of the most important operating elements and displays.
The unit has been fitted with two types of keys:
1. Keys with dedicated functions and
2. Keys with context-sensitive functions
2.5.1 Keys with dedicated functions
These five keys are arranged on the left-hand bank of keys and are marked with their functions.
The key functions are described in Table 1.
2.5.2 Keys with context-sensitive functions
The unit has eight context-sensitive defined function keys (F keys). The F keys are located in the right-hand
bank of keys directly next to the display. Their current functions are shown in the appertaining monitor area.
This
document
is
for
information
only
