Instructions for Use RAUMEDIC
MPR2 logO
Manufacturer:
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany
Page 31 of 99
4.2.3 Open a new patient documentation
The symbol indicates that a pull-down menu has been provided. Use the arrow keys to navigate to
another pull-down menu.
Software version
If you want to open a new patient documentation, you need not do anything and can continue with the
selection of the memory mode. If you want to continue with the last patient, press the Menu key first of all.
The “Continue measurement” option can only be selected, if data of a previous patient still are saved on
the MPR2. If the data saved on the MPR2 have been deleted (cf. chapter 4.2.2 Deleting the memory), a
new patient is set up automatically.
If the measurement is continued, this
measurement will be allocated to a patient
automatically when the data are
downloaded to the PC. No additional
query is displayed. Wrongly allocated data
can not be re-sorted automatically.
Software version
Use the arrow key to navigate to the requested setting. If you want to accept the selected setting, you can
now press OK. If you want to discard your selection, press the ESC key to return to the previous step.
The patient IDs are counted up to 99999,
subsequently the IDs are continued with
1, which however has no influence on the
storage. Internally the patient IDs are
counted further. The last five digits of the
internal patient IDs only are displayed. An
ID 0 is suppressed.
Software version
This
document
is
for
information
only
