KI-1981A MRC7600—Installation, Programming and Operations Manual
Page 41 of 48 (06/30/98)
Media-Center Telephone
#24 Media-Center Control Function
This function allows a display phone to review and, if necessary, terminate a user’s
control of a Media Line. (The Media Center phone must be assigned the “Admin”
Class of Service.) Dialing
#24
will display the first video player’s status in the
following manner:
VCR 717 = 105
or
VCR 718 = Free
“VCR” indicates the player’s line, which may be either a video-tape or a laser-disk
player. The first display shows that the player on Media Line 717 is currently
assigned to phone line 105. The second display indicates that player 718 is
currently available.
To Pre-assign a Player
Enter the Architectural (dialing) Number of the station to which you are assigning
the player. The display will then list the new station owner. Unless the Media-
Center telephone intervenes, only that owner can call this player, and the player
will receive the initializing tones when it is called.
To Terminate a Connection
Important:
This method works whether or not a user is connected to a Media Line.
Press the asterisk (
*
) key on your dial pad. The display will show that the line is
“Free” after sending the ending tones to that line. The status LED will go out.
Pressing
*
when the player is already “Free” will also send the ending tones to it.
To View the Next Player Extension
5