Rauch TWS 85.1, Instruction Manual

Page: 41 / 104

Commissioning
35
6
6.3 Tractor requirements for the load transfer vehicle

Minimum tractor motor capacity 160 hp

Admissible bearing load of the pin or ball coupling: 2000 kg

For TWS 85.1, drive of the auger conveyor, the slide and the hopper cover:
-
1 double-acting control unit or
- 1 single-acting control unit with free return

Universal drive shaft connection: 1 3/8 inches, 6 splines, 540 rpm,

Hydraulic power: min. 45 l/min at p=180 bar, constant flow

Oil supply: max. 180 bar, single or double-acting valve (depending on equip-
ment)

Free return

Operating voltage: 12 V, must also be ensured if several loads are connected
simultaneously
n
DANGER
Danger to life due to unsuitable tractor
Using an unsuitable tractor for the machine may result in severe
accidents during operation or road travel.
 Only use tractors that comply with the technical require-
ments of the machine.
 Use the vehicle's documentation to check if your tractor is
suitable for the machine.