Rauch TWS 85.1, Instruction Manual

Page: 19 / 104

Safety
13
3
3.8 Maintenance and service
Maintenance and service work involves additional hazards that do not occur dur-
ing operation of the machine.

Any maintenance and service work is to be conducted with increased alert-
ness at all times. Work very carefully and with awareness of danger.
3.8.1 Qualifications of maintenance staff

Welding and work on the electrical and hydraulic systems is to be carried out
by qualified technicians only.

Repair work on tyres and wheels may only be carried out by specialised staff
with the suitable mounting tools.

Setting and repair work on the brake system may only be carried out by spe-
cialist workshops.
3.8.2 Wear parts

The maintenance and service intervals described in the present operator's
manual are to be strictly adhered to at all times.

Furthermore, the maintenance and service intervals of the supplier compo-
nents must also be complied with. See the supplier documentation for the rel-
evant intervals.

We recommend that you have the condition of the machine checked after
each season by your specialist dealer, paying particular attention to its fixing
components, safety-relevant plastic components, hydraulic system, metering
parts and spreader vanes.

Spare parts must at least comply with the technical requirements specified by
the manufacturer. The technical standards can be guaranteed by using gen-
uine spare parts.

Self-locking nuts are designed to be used only once. Always use new self-
locking nuts to secure components (e. g. covers).