Fig. 23: Scale for adjusting the application rate
[1]
Numeric scale
[2]
Stop
[3]
Left-hand adjustment lever for metering
slide
[4]
Locking mechanism for synchronous setting
of the adjustment levers
[5]
Right-hand adjustment lever for metering
slide
9.4.1
Actuating both metering slides together
Use these instructions if you want to spread the same amount on both sides.
u
Close the metering slides completely.
u
Determine the position of the stop [2]. The correct value can be found in the spreading material
chart or determined based on the calibration test.
u
Actuate the locking mechanism [4].
u
Move both adjustment levers for metering slides to the determined position.
9.4.2
Actuating the metering slides separately
Use these instructions if you want to spread different amounts on the two sides.
9. Spreading operation
56
5901026
SA 121
Summary of Contents for SA 121
Page 6: ...Table of contents 6 5901026 SA 121...
Page 90: ......
