u
Dismount the screws of the spreading vanes with the respective nuts and washers.
Fig. 20: Spreading density on the right in direction of travel
White arrow: Rotational direction of
spreading disc
Grey arrow: Adjustment of the spreading
vanes against the rotary direction of the
spreading disc
u
Reset the spreading vanes against the rotary direction of the spreading disc.
With this setting, the spreading material is ejected earlier.
u
Screw on the spreading vane (tightening torque: approx. 18 Nm). For this purpose, always use
new self-locking nuts.
The spreading density on the right-hand side viewed in the direction of travel is increased.
7. Commissioning
46
5901026
SA 121
Summary of Contents for SA 121
Page 6: ...Table of contents 6 5901026 SA 121...
Page 90: ......
