Rauch QUANTRON-K2, Instruction Manual

Page: 56 / 102

Operation QUANTRON-K2 4
50
4.7 Operating lights (SpreadLight)
In this menu, the SpreadLight function can be activated and the spreading pattern
can be monitored even in the night mode.
Figure 4.17: SpreadLight menu
[1] Turn off delay
[2] Switch on operating lights
[3] Activate automatic mode
The SpreadLight function has 2 modes:
Activate
The operating lights are activated and remain on until you delete the check mark
or leave the menu.
1. Call up the Main menu > SpreadLight menu.
2. Select the Activate [2] menu option.
3. Press the Enter key .

A check mark is shown in the display.

The function is activated.
4. In the Activate menu entry, press the Enter key again.

The tick disappears.

The operating lights are switched off.
2
3
1