Rauch QUANTRON-K2, Instruction Manual

Page: 40 / 102

Operation QUANTRON-K2 4
34
4.5.4 Disc speed (HydroControl option)
You can enter the desired disc speed in the Disc speed submenu.
1. Call up the Spreading mat. settings > Disc speed submenu.
 The display shows the currently applied disc speed.
2. Enter a new value.
3. Press the Enter key .
 The new value is saved in the control unit.
 The display shows the Spreading mat. settings menu.
NOTICE
When the Dispersion AUTO function is active , the QUANTRON-K2 control
unit determines the disc speed depending on the selected spreading material
and working width.
When the
Dispersion AUTO function is deactivated , you must manually enter
the disc speed.

See 5.2.5: Adjusting the spreading width with the Dispersion AUTO function
and actuator for the half-side slide, page 76

See 5.10: Disc speed adjustment (HydroControl only), page 83
NOTICE
Enter a speed of at least 150 rpm to ensure sufficiently accurate spreading
work.