Rauch QUANTRON-A, Instruction Manual

Page: 43 / 120

Operation QUANTRON-A
37
4
Entering the remaining quantity when refilling:
1.
Call up the Weighing - Trip count. > Rest (kg, ha, m) menu.
 The remaining material from the last spreading process is displayed.
2. Fill the hopper.
3. Enter the new total weight of the fertiliser in the hopper.
Also see chapter
4.14.2: Input of values using the cursor keys, page 88 .
4. Press the enter key .
 The device calculates the values for the possible area to be spread and
the possible spreading distance.
5. Press the kg key.
 This returns you to the operating screen.
Calling up the remaining quantity during spreading:
During spreading, the remaining quantity is continuously recalculated and
displayed. See chapter
5: Spreading operation using the QUANTRON-A control
unit, page 91 .
4.3.3 Zeroing the scales (AXIS with weigh cells only)
In this menu, the weight for the empty hopper is to be set to 0 kg.
The following conditions must be met when taring the scales:

The hopper is empty.

The machine is at a standstill.

The PTO is switched off,

The machine is in a horizontal position and off the ground.

The tractor is at a standstill.
Taring the scales:
1.
Call up the Weighing - Trip count. > Zero scales menu.
2. Press the enter key .
 The weighing value for the empty scales is now set to 0 kg.
 The display shows the Weighing - Trip counter menu
NOTICE
Tare the scales before each use to ensure that the remaining quantity is
calculated correctly.