9.12
RV 2M1 row spreading system for hops and fruit cultivation
The RV 2M1 row spreading system is parked in the upper link of the drawbar. The row spreading
system is designed such that an approx. 1 m wide plant row [Y] is spread, depending on the fertilizer,
for each row [X] to the right and left of the machine (row spacing: approx. 2 to 5 m).
Fig. 59: Spreading with the row spreading system
[X] Row spacing
[Y] Width of the plant row
9.12.1
Pre-configuration of the machine
u
Before mounting the RV 2M1,
the spreading vanes on both spreading discs must be set to
the A2-A2 setting
.
NOTICE!
Material damage to the spreading vanes and RV 2M1 row spreading system
If the spreading vanes are set to higher values than A2-A2, the spreading vanes may impact the
guiding plates of the RV 2M1 row spreading system.
u
Never set the spreading vanes to higher values than A2-A2.
u
After mounting the RV 2M1 row spreading system, check the free passage of the spreading
discs (turn the spreading discs by hand) with the tractor switched off.
9. Spreading operation
102
5902916
MDS 8.2/14.2/18.2/20.2
Summary of Contents for MDS 8.2
Page 150: ......
